Canadair on the Lake.

...an afternoon cruise

It's not often that I get to the lake; access is restricted so it's only on nice afternoons when it's not to windy. And only on a few couple of days a week.

On this particular afternoon things were looking good, so I arrived at the lake only to find that it was pretty windy.

Now the Canadair is a very capable and stable flyer, but I'm nervous about mishaps on water, necessitating getting my inflatable rescue craft out, blowing it up before paddling across the lake you're not supposed to go boating on.

Anyway, I decided to fly nonetheless and, fortunately, things went fine. The water wasn't too rough nor the wind too gusty, so I had a pleasant afternoon cruising the Canadair around and doing takeoffs and landing without having to call the rescue squad...

Firstar V2. Sunrise Series II.

...sunrise and mist

Going into autumn I again have the opportunity to enjoy sunrises at the field as they coincide with my journey to work. On this particular occasion there was the extra bonus of mist covering the outer fields.

In the suburbs mist is a rare visitor, so I feel especially to spent time with this ethereal visitor, so quickly dispelled with the approach of the sun's rays.

The window of sunrise was quite small, one of those where the light squeezes between horizon and clouds for a few minutes, blossoming brightness growing again quickly dull as the sun heads into the clouds.

Nevertheless, it was a beautifully tranquil morning, with a mix of clouds, mist and sun...

Turbo Porter. S.T.O.L. Fun.

...windy-day fun

Having just successfully flown the Stinger jet after its repair, I headed down the road for a chill-out session with the Turbo Porter.

As it turned out, the wind had freshened considerably to the degree that I had initial trouble getting a stable take-off run. However, having banished those gremlins, I settled into enjoying the PC-6's thoroughbred characteristics.

Despite the breezy and gusty conditions, the PC-6 was always stable and, with flaps fully deployed, could almost be landed vertically. And, one the one touch and go, the PC-6 appeared to bounce leisurely into a near vertical climb with ease.

So a fun end to an action-packed afternoon's flying...

Stinger 64 EDF. Repair Flight.

...back in the air!

It was months ago when, having too much fun with the Stinger, I inadvertently sent it speeding into the swampy paddock grass, where it half its nose and my near-new nanotech battery disappeared into the mud.

Since then I have agonised over how I was to replicate the tapering form of the nose, which also accommodates the canopy magnet and terminates into the join with the nosecone.

Eventually I used rear sections of the original fuselage (funny how you never crash backwards), although this wasn't quite right and had to be cut, and then added onto, and then filled, and sanded, and painted.

However, after this unnecessarily protracted affair, the Stinger was again airworthy and looking pretty good. However, the proof of the pudding if in how well it flies.

Fortunately, in this case, it flew as well as ever, and I was gifted with a good launch as well. So back to enjoying a few run-filled, adrenalin rushing minutes screeching the Stinger around the paddocks...

Raptor Glider 2000. Gorgeous Clouds.

...beautiful afternoon to be in the sky

I love clouds, especially crisp fresh clouds. Or wispy clouds driven by high chill winds. But especially good are those times when you're treated to a dramatic combination of developing clouds made more dramatic, in this case, by warm afternoon glow from the opposite horizon.

The conditions were windy and a little turbulent, as you might imagine, but nothing to deter the Raptor from having a bit of fun cruising around and surfing the breeze.

Fying with such gorgeous sky scenery is a real treat, and one of those occasions on which I'm so happy to be able to get something in the sky and be a part of nature's beautiful spectacle.

Turbo Porter PC6. Wing Cam.

...an intriguing viewpoint

I decided to give the Turbo Porter a go with a wing cam - I’ve only tried this once before on the Raptor glider, and I thought that the Porter would be a good candidate to handle the imbalance that the weight & drag of the camera creates.

I also thought I’d try a ground, putting the mobius on a mini tripod to capture launch and landing action.

Well it turns out that the latter is a bit trickier than I expected; it has to be located far enough away that the plane has lifted off, obviously, so there’s running back & forth to set it up. Secondly, when I have to fly to fixed cameras my flying goes to pieces. I crashed the Rarebear doing this after having flown it twice without incidence beforehand.

Despite the incumberences of the wing and ground cameras, I still managed to get some nice footage, with the wing cam providing intriguing fixed footage of the Porter as the scenery and lighting revolve around it.

And I managed to capture about a second of takeoff from the ground cam. At least I didn’t hit it...

GeeBee R3. Flying Around.

...having some fun

The little GeeBee is kind-of strange to fly, as I may have said before - it appears to be dragged around by its engine and has the very characteristic forward-jutting undercarriage.

However, despite odd characteristics, it does fly quite sweetly, although don't fly it too slow or you'll have it upside down in the grass from a tip stall

One thing it does for you, almost without trying too hard, it knife edge. Maybe not exactly perfectly, however very stable and most entertainingly.

So, while I was buzzing it around, I put it into increasingly steep turns and had it knife-edging around for my amusement.

A fun little plane, except when you try and land it on grass...