I had a go at trying to fix my other transmitters issue with chatter on the aileron control. After having seen instructions on how to disassemble the DX6i while I was reading through that controller's instruction manual, I bit the bullet and decided to have a go with the other.
There are six screws at the rear of the unit which need to be undone, then you simply pivot the back down at the bottom and lay it down flat. There is sufficient cable length to make this easy, and it's obviously how they assemble it.
What was immediately clear, however, was that replacing the potentiometer on the aileron control would not be easy - it's well integrated and unfortunately not easy to disassemble. That's why there doesn't seem to be any spares on offer, at least for this particular unit, with the exception of a replacement antenna, which simply slots into place.
No comments:
Post a Comment