I've encountered a mystifying problem when I connected the receiver on the Walrus to the control leads. The setup in this particular case was as easy as you get, with each lead having with a numeric tag and the receiver having corresponding labels.
To make life even easier, the ESC already has an XT60 plug to connect straight to the battery. The only change I needed to make was to put an extension lead onto the control lead from the ESC, as this was just way too short.
However, when I powered it up nothing happened. Usually one hears a momentary chatter of the servos powering up, but this time absolutely nothing. To cut a long and most frustrating episode short, after having swapped ESC's and receivers to no avail, I have transplanted my six-channel receiver from the Floater with success.
The Floater, by the way, is still resting in the study...
No comments:
Post a Comment